ASSEMBLING THE YOUTH PLATEN INSERT
Below are the instructions for assembling the Youth Platen Insert for use with the T-Lock Platen on the Brother DTG Printers.
1. Locate the Youth Platen Insert, two T-Lock Brackets and four (4) screws.
2. Place the T-Lock Bracket under the Youth Platen Insert and put two screws through the top of the insert so the head of the screw goes into the counter sunk hole. Use a screw driver (not included) to tighten the screw. Do not over tighten.
3. Repeat the process for the 2nd T-Lock Bracket.
WORKING WITH THE YOUTH PLATEN INSERT
To install the Youth Insert, you will want to place the two T-Lock Brackets on the bottom side of the Youth Insert into the two slots on the T-Lock Base. The two Registration Bolts will slide into the two corresponding holes in the Youth Insert.
Then rotate the center pieces of the T-Lock Brackets to lock the Youth Insert into place.
ARTWORK POSITIONING
When preparing the artwork for printing, use a 10” x 12” artwork template and the Youth Platen option in the appropriate Brother GT Driver.